Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Sentra SE-R >> Repair and Diagnosis >> Transmission >> Automatic Transmission (CVT) >> Service Information >> DTC P0720: Output Speed Sensor >> DTC Confirmation Procedure >> With Consult

With Consult

  1. Turn ignition switch ON and select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT.
  2. Start engine and maintain the following conditions for at least 12 consecutive seconds.

    ACC PEDAL OPEN: More than 1.0/8 

    RANGE: "D" position 

    Driving location: Driving the vehicle uphill (increased engine load) will help maintain the driving conditions required for this test  .

  3. If DTC is detected, go to "DIAGNOSIS PROCEDURE ".
scientia non olet · About Mike's Workshop Manuals