Inspection Procedure

WARNING: This page is about a different variant/trim than selected.

PERFORM "SPEC" OF "DATA MONITOR" MODE
With CONSULT

NOTE: Perform "SPEC" in "DATA MONITOR" mode in maximum scale display.
1. Perform "BASIC INSPECTION ".
2. Confirm that the testing conditions indicated above are met.
3. Select "B/FUEL SCHDL", "A/F ALPHA-B1" and "MAS A/F SE-B1" in "SPEC" of "DATA MONITOR" mode with CONSULT.
4. Make sure that monitor items are within the SP value.
Is the inspection result normal?

YES: END

NO: Proceed to "DIAGNOSIS PROCEDURE ".