Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Installation is in the reverse order of removal.

NOTE: Bolt hole is not threaded on new clutch housing. Self-tapping bolt is used to attach lock plate to clutch housing.

Securely install each cable to shift lever and select lever.
Be careful about the installation direction, and screw shift selector handle onto shift selector.
←: Front

Fig 1: Identifying Shift Selector Handle Position
Courtesy of NISSAN NORTH AMERICA, INC.
When shift selector is moved to 1st-2nd side and 5th-6th side of neutral gate, confirm shift selector returns to neutral position smoothly.
When shift selector is moved to each position, make sure there is no binding or disconnection of each boot.