Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Control System - DTCS P1212 To P2A00 (MR20DE) (CALIFORNIA)) >> DTC P1574: ASCD Vehicle Speed Sensor >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.
CAUTION: Always drive vehicle at a safe speed.
NOTE: If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

TESTING CONDITION: 

Step 3 may be conducted with the drive wheels lifted in the shop or by driving the vehicle. If a road test is expected to be easier, it is unnecessary to lift the vehicle  .

With CONSULT

  1. Start engine.
  2. Select "DATA MONITOR" mode with CONSULT.
  3. Drive the vehicle at more than 40 km/h (25MPH).
  4. Check DTC.
  5. If DTC is detected, go to "DIAGNOSIS PROCEDURE ".

With GST

Follow the procedure "With CONSULT" above.

scientia non olet · About Mike's Workshop Manuals