EXCEPT FOR M/T MODELS: Diagnosis Procedure

Check DTC with TCM. Refer to , "CONSULT FUNCTION (TRANSMISSION) ".

Is the inspection result normal? 

YES: GO TO 2.

NO: Perform trouble shooting relevant to DTC indicated.

Check DTC with ABS actuator and electric unit (control unit). Refer to , "CONSULT FUNCTION (ABS) ".

Is the inspection result normal? 

YES: GO TO 3.

NO: Perform trouble shooting relevant to DTC indicated.

Check DTC with combination meter. Refer to , "CONSULT FUNCTION (METER/M&A) ".

Is the inspection result normal? 

YES: GO TO 4.

NO: Perform trouble shooting relevant to DTC indicated.

Check secondary speed sensor. Refer to , "DIAGNOSIS PROCEDURE ".

Is the inspection result normal? 

YES: GO TO 5.

NO: Replace or replace error-detected parts.

Check wheel sensor. Refer to , "WHEEL SENSOR SYSTEM INSPECTION ".

Is the inspection result normal? 

YES: Check intermittent incident. Refer to "DIAGNOSIS PROCEDURE ".

NO: Replace or replace error-detected parts.