Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Sentra Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission (CVT)) >> Service Information >> Shift Position Indicator Circuit >> Diagnosis Procedure >> Notes

Diagnosis Procedure: Notes

WARNING: This page is about a different variant/trim than selected.
  1. CHECK INPUT SIGNALS

    With CONSULT 

    1. Start engine.
    2. Select "MAIN SIGNALS" in "DATA MONITOR" mode for "TRANSMISSION" with CONSULT and read out the value of "RANGE".
    3. Check that the following three positions or indicators are same.
    • Actual position of the selector lever
    • "RANGE" on CONSULT screen
    • Shift position indicator in the combination meter

    OK or NG 

    OK: INSPECTION END 

    NG: Check the following.

scientia non olet · About Mike's Workshop Manuals