Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Sentra Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction (MR20DE) (CALIFORNIA) >> Service Information >> Trouble Diagnosis - Specification Value >> Inspection Procedure

Inspection Procedure

  1. PERFORM "SPEC" OF "DATA MONITOR" MODE

    With CONSULT

    NOTE: Perform "SPEC" in "DATA MONITOR" mode in maximum scale display.
    1. Perform "BASIC INSPECTION ".
    2. Confirm that the testing conditions indicated above are met.
    3. Select "B/FUEL SCHDL", "A/F ALPHA-B1" and "MAS A/F SE-B1" in "SPEC" of "DATA MONITOR" mode with CONSULT.
    4. Make sure that monitor items are within the SP value.

    Is the inspection result normal? 

    YES: END

    NO: Proceed to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals