Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Sentra Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System - Introduction (Qr25DE)) >> Service Information >> Basic Service Procedure >> Fuel Pressure Check >> Fuel Pressure Release >> With CONSULT

With CONSULT

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch ON.
  2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT.
  3. Start engine.
  4. After engine stalls, crank it two or three times to release all fuel pressure.
  5. Turn ignition switch OFF.
scientia non olet · About Mike's Workshop Manuals