Starter Motor
STARTER MOTOR SPECIFICATIONS
| Type | M000TA0072 | ||
| MITSUBISHI make | |||
| Reduction gear type | |||
| System voltage | [V] | 12 | |
| No-load | Terminal voltage | [V] | 11 |
| Current | [A] | Less than 90 | |
| Revolution | [RPM] | More than 2, 400 | |
| Minimum diameter of commutator | [mm (in)] | 28.0 (1.102) | |
| Minimum length of brush | [mm (in)] | 5.5 (0.217) | |
| Brush spring tension | [N (kg, lb)] | 15.0 - 20.4 (1.53 - 2.08, 3.37 - 4.59) | |
| Clearance between bearing metal and armature shaft | [mm (in)] | Less than 0.2 (0.008) | |
| Clearance between pinion front edge and pinion stopper | [mm (in)] | 0.5 - 2.0 (0.020 - 0.079) | |