Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Quest LE >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Audio, Visual, Navigation System (Base Audio) (With Separate Display) >> Basic Inspection >> Additional Service When Replacing (Av Control Unit) >> Work Procedure

Work Procedure

  1. SAVING VEHICLE SPECIFICATION

    CONSULT Configuration

    Perform "Before Replace ECU" to save or print current vehicle specification. Refer to "DESCRIPTION ".

    NOTE: If "Before Replace ECU" can not be used, use the "Manual Configuration".

    : GO TO 2.

  2. REPLACE AV CONTROL UNIT

    Replace AV control unit. Refer to "REMOVAL AND INSTALLATION ".

    : GO TO 3.

  3. WRITING VEHICLE SPECIFICATION

    CONSULT Configuration

    Perform "After Replace ECU" or "Manual Configuration" to write vehicle specification. Refer to "WORK PROCEDURE ".

    : GO TO 4.

  4. OPERATION CHECK

    Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.

    : WORK END

scientia non olet · About Mike's Workshop Manuals