Commercial Service Tools

WARNING: This page is about a different variant/trim than selected.

Tool name (Kent-Moore No.)		Description
(J-45488) Quick connector release	Courtesy of NISSAN NORTH AMERICA, INC.	Removes fuel tube quick connectors in engine room
Leak detector i.e.: (J-41416)	Courtesy of NISSAN NORTH AMERICA, INC.	Locates the EVAP leakage
EVAP service port adapter i.e.: (J-41413-OBD)	Courtesy of NISSAN NORTH AMERICA, INC.	Applys positive pressure through EVAP service port
Fuel filler cap adapter i.e.: (MLR-8382)	Courtesy of NISSAN NORTH AMERICA, INC.	Checks fuel tank vacuum relief valve opening pressure
Socket wrench	Courtesy of NISSAN NORTH AMERICA, INC.	Removes and installs engine coolant temperature sensor. Refer to "EXPLODED VIEW ".
Oxygen sensor thread cleaner i.e.: (J-43897-18) (J-43897-12)	Courtesy of NISSAN NORTH AMERICA, INC.	Reconditions the exhaust system threads before installing a new oxygen sensor. Use with anti-seize lubricant shown below. 18 mm diameter with pitch 1.5 mm for Zirconia Oxygen Sensor 12 mm diameter with pitch 1.25 mm for Titania Oxygen Sensor
Anti-seize lubricant i.e.: (Permatex™ 133AR or equivalent meeting MIL specification MIL-A-907)	Courtesy of NISSAN NORTH AMERICA, INC.	Lubricates oxygen sensor thread cleaning tool when reconditioning exhaust system threads.