Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Murano SL, AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belts (Except CROSSCABRIOLET) >> Precaution >> Precautions >> For MEXICO >> FOR MEXICO: Precaution for Seat Belt Service >> Notes

FOR MEXICO: Precaution for Seat Belt Service: Notes

CAUTION:
  • Before removing the front seat belt pre-tensioner assembly, turn the ignition switch off, disconnect both battery cables and wait at least 3 minutes.
  • Never use electrical test equipment for front seat belt pre-tensioner connector.
  • After replacing or reinstalling front seat belt pre-tensioner assembly, or reconnecting front seat belt pre-tensioner connector, check the system function. Refer to DIAGNOSIS DESCRIPTION .
  • Never use disassembled buckle or seat belt assembly.
  • Replace anchor bolts if they are deformed or worn out.
  • Never oil tongue and buckle.
  • If any component of seat belt assembly is questionable, never repair. Replace the entire seat belt assembly.
  • If webbing is cut, frayed or damaged, replace seat belt assembly.
  • When replacing seat belt assembly, use a genuine NISSAN seat belt assembly.
scientia non olet · About Mike's Workshop Manuals