Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Murano SL, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Security Control System (CROSSCABRIOLET)) >> DTC/Circuit Diagnosis >> DTC B2560: Starter Control Relay >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • If DTC B2560 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
  • If DTC B2560 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".
DTC No. Trouble diagnosis name DTC detecting condition Possible causes
B2560 STARTER CONT RELAY BCM detects a mismatch between the OFF request of starter control relay to IPDM E/R and the feedback.
(The feedback is ON instead of OFF.)
  • Harness or connectors

    (The CAN communication line is open or shorted.)

  • IPDM E/R
scientia non olet · About Mike's Workshop Manuals