Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1212 To P2A03 (Except CROSSCABRIOLET) >> DTC P2101: Electric Throttle Control Function >> Component Inspection

Component Inspection

  1. CHECK THROTTLE CONTROL MOTOR
    1. Turn ignition switch OFF.
    2. Disconnect electric throttle control actuator harness connector.
    3. Check resistance between electric throttle control actuator terminals as per the following.
    Terminals Resistance
    5 and 6 Approx. 1 - 15 Ω [at 25°C (77°F)]

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: GO TO 2.

  2. REPLACE ELECTRIC THROTTLE CONTROL ACTUATOR
    1. Replace electric throttle control actuator. Refer to "EXPLODED VIEW ".
    2. Go to "SPECIAL REPAIR REQUIREMENT ".

    INSPECTION END

scientia non olet · About Mike's Workshop Manuals