Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1212 To P2A03 (Except CROSSCABRIOLET) >> DTC P1564: ASCD Steering Switch >> Component Inspection

Component Inspection

  1. CHECK ASCD STEERING SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect combination switch (spiral cable) harness connector.
    3. Check resistance between combination switch harness connector terminals as per the following.
    Combination switch Condition Resistance (Ω)
    Connector Terminals
    M33 13 and 16 MAIN switch: Pressed Approx. 0
    CANCEL switch: Pressed Approx. 250
    SET/COAST switch: Pressed Approx. 660
    RESUME/ACCELERATE switch: Pressed Approx. 1, 480
    All ASCD steering switches: Released Approx. 4, 000

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace ASCD steering switch

scientia non olet · About Mike's Workshop Manuals