Component Inspection (Cooling Fan Relay)

CHECK COOLING FAN RELAY

Disconnect cooling fan relays -2, -3 harness connectors.
Check continuity between cooling fan relay -2, -3 terminals under the following conditions.

Terminals	Conditions	Continuity
3 and 5 6 and 7	12 V direct current supply between terminals 1 and 2	Existed
3 and 5 6 and 7	No current supply	Not existed

Fig 1: Checking Continuity Between Cooling Fan Relay -2, -3 Terminals

Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES: INSPECTION END

NO: Replace cooling fan relay.