Removal and Installation: Removal

Remove the front door grip cover. Refer to "REMOVAL AND INSTALLATION ".
Using a suitable tool, remove the clip (A) from the door grip.
CAUTION: Wrap a cloth around suitable tool to protect components from damage.

Fig 1: Identifying Door Grip Clip
Courtesy of NISSAN NORTH AMERICA, INC.
Using a suitable tool, release the metal clip and lift the main power window and door lock/unlock switch (2) and finisher (1) as an assembly starting from the rear, pull upward to remove it from the front door finisher.
□ : Metal clip

CAUTION: Wrap a cloth around suitable tool to protect components from damage.
Disconnect the harness connector from the main power window and door lock/unlock switch.
Release the pawls on each side to separate the switch finisher (1) from the main power window and door lock/unlock switch (2).
◦: Pawl

Fig 2: Identifying Door Lock/Unlock Switch And Switch Finisher
Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION: Do not damage the pawl of the switch finisher.