Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Maxima S >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> DTC/Circuit Diagnosis >> DTC B2556: Push-Button Ignition Switch >> Component Inspection

Component Inspection

  1. CHECK PUSH-BUTTON IGNITION SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect push-button ignition switch harness connector.
    3. Check continuity between push-button ignition switch terminals under the following conditions.
      Push-button ignition switch Condition Continuity
      Terminal
      1 4 Pressed Yes
      Not pressed No
      Fig 1: Checking Continuity Between Push-Button Ignition Switch Terminals
      G05046589Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace push-button ignition switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About Mike's Workshop Manuals