Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Leaf SL >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> EV Control System >> DTC/Circuit Diagnosis >> DTC U1010: Control Module (Can) >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING
    • Turn power switch OFF and wait at least 20 seconds.
    • Make sure that 12V battery voltage is 11 V or more.

      GO TO 2.

  2. DTC REPRODUCTION PROCEDURE

    With CONSULT 

    1. Turn power switch ON and wait at least 5 seconds.
    2. Check self-diagnostic result.

      Is DTC detected? 

      YES: Proceed to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals