Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Juke SL, FWD, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Security Control System) >> With Intelligent Key System >> DTC/Circuit Diagnosis >> DTC B26E8: Clutch Interlock Switch >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTION LOGIC CHART

DTC No. Trouble diagnosis name DTC detection condition Possible cause
B26E8 CLUTCH SW BCM detects the following conditions for 2 seconds or more.
  • Clutch pedal position switch input (CAN) from ECM: ON (Clutch pedal is released)
  • Clutch interlock switch signal: ON (Clutch pedal is depressed)
  • Harness or connector (CAN communication line is open or shorted)

    (Clutch interlock switch circuit is open or shorted)

    (Clutch pedal position switch circuit is open or shorted)

  • Clutch interlock switch
  • BCM
scientia non olet · About Mike's Workshop Manuals