Work Procedure

PREPARATION BEFORE CALIBRATION PROCEDURE
1. Park the vehicle on a level surface.
2. Adjust air pressure of all tires to the specified pressure. "TIRE AIR PRESSURE ".
GO TO 2.
PERFORM CALIBRATION
With CONSULT
1. Turn ignition switch ON.
  CAUTION: Never start engine.
2. Select "Work Support" mode in "ENGINE".
3. Select "G SENSOR CALIBRATION".
4. Touch "Start".
CAUTION: Never swing the vehicle during "G sensor calibration".

Is "COMPLETED" displayed?

YES: END

NO: Perform steps 1 and 2 again.