Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Juke SL, FWD, Automatic CVT Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System >> DTC/Circuit Diagnosis >> Rear Power Window Switch >> Component Inspection

Component Inspection

  1. CHECK REAR POWER WINDOW SWITCH
  1. Turn ignition switch OFF.
  2. Disconnect rear power window switch connector.
  3. Check rear power window switch terminals under the following conditions.
Rear power window switch Condition Continuity
Terminal
1 5 UP Existed
3 4
2 5 NEUTRAL
3 4
1 4 DOWN
2 5

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace rear power window switch.