Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Wiper System / Washer System) >> Headlight Washer Switch Test/Replacement >> Canada models

Canada models

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver's dashboard undercover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  2. Push out the headlight washer switch (A) from the back of the instrument panel.
    Fig 1: Identifying Headlight Washer Switch And 6P Connector
    G08055445Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the 6P connector (B) from the switch.
  4. Check for continuity between the terminals in each switch position according to the table.
    Fig 2: Identifying Terminals Of Headlight Washer Switch In Table
    G08055446Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. If the continuity is not as specified, replace the bulb (A) or the headlight washer switch.
    Fig 3: Rotating Bulb And Press Headlight Washer Switch
    G08055447Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Install the switch in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals