Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect front power window switch (passenger side) connector.
3. Turn ignition switch ON.
4. Check voltage between front power window switch (passenger side) harness connector and ground.

   (+)		(-)	Condition		Voltage (V) (Approx.)
   Front power window switch (passenger side)
   Connector	Terminal
   D25	12	Ground	Power window main switch (passenger side)	UP	Battery voltage
   				DOWN	0
   	11			UP	0
   				DOWN	Battery voltage

   Is the inspection result normal? 

   YES >> GO TO 2.

   NO >> GO TO  3.

Check front power window switch (passenger side).

Refer to "COMPONENT INSPECTION ".

Is the inspection result normal? 

YES >> GO TO  4.

NO >> Replace front power window switch (passenger side). Refer to "REMOVAL AND INSTALLATION ".

1. Turn ignition switch OFF.
2. Disconnect power window main switch connector.
3. Check continuity between power window main switch harness connector and front power window switch (passenger side) harness connector.

   Power window main switch		Front power window switch (passenger side)		Continuity
   Connector	Terminal	Connector	Terminal
   D5	16	D25	12	Existed
   	12		11

4. Check continuity between power window main switch harness connector and ground.

   Power window main switch		Ground	Continuity
   Connector	Terminal
   D5	16		Not existed
   	12

   Is the inspection result normal? 

   YES >> Replace power window main switch. Refer to "REMOVAL AND INSTALLATION ".

   NO >> Repair or replace harness.

Refer to "INTERMITTENT INCIDENT ".

>> INSPECTION END