Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> 370Z Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System (Roadster) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: Special Repair Requirement >> Check Anti-Pinch Function

Check Anti-Pinch Function

  1. Fully open the door window.
  2. Place a piece of wood near fully closed position.
  3. Close door glass completely with AUTO-UP.
    • Check that glass lowers for approximately 150 mm (5.9 in) without pinching piece of wood and stops.
    • Check that glass does not rise when operating the power window main switch while lowering.
    CAUTION:
    • Do not check with hands and other part of body because they may be pinched. Do not get pinched.
    • Check that AUTO-UP operates before inspection when system initialization is performed.
    • Perform initial setting when auto-up operation or anti-pinch function does not operate normally.
    • Finish initial setting. Otherwise, next operation cannot be performed.
    1. Auto-up operation
    2. Anti-pinch function
    3. Automatic window adjusting function
    4. Key cylinder switch power window function
    5. Power window UP operation while door is open
scientia non olet · About Mike's Workshop Manuals