Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> 370Z Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (VDC/TCS/Abs) >> DTC/Circuit Diagnosis >> VDC Off Indicator Lamp >> Component Function Check

Component Function Check

  1. VDC OFF INDICATOR LAMP OPERATION CHECK 1

    Check that the lamp illuminates for approximately 3 seconds after the ignition switch is turned ON.

    Is the inspection result normal? 

    YES >> GO TO 2.

    NO >> Proceed to diagnosis procedure. Refer to , "DIAGNOSIS PROCEDURE ".

  2. VDC OFF INDICATOR LAMP OPERATION CHECK 2

    Check that the VDC OFF indicator lamp in the combination meter turns ON/OFF correctly when operating the VDC OFF switch.

    Is the inspection result normal? 

    YES >> INSPECTION END

    NO >> Check the VDC OFF switch. Refer to , "COMPONENT INSPECTION ".

scientia non olet · About Mike's Workshop Manuals