Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2011 >> Sentra SE-R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0506 To P2A00 (MR20DE) (Except CALIFORNIA) >> DTC P0850 PNP Switch >> Overall Function Check >> With GST

With GST

  1. Turn ignition switch ON.
  2. Check voltage between ECM terminal 14 (PNP signal) and ground under the following conditions.
    VOLTAGE SPECIFICATION CHART

    Condition (Shift lever) Voltage (Known-good data)
    P or N position (CVT)
    Neutral position (M/T)    		 BATTERY VOLTAGE (11 - 14 V)
    Except above Approx. 0 V
  3. If NG, go to "DIAGNOSIS PROCEDURE ".
    Fig 1: Checking Voltage Between ECM Terminal 14 (PNP Signal) And Ground
    G07140115Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals