Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2011 >> Sentra SE-R >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass, Window System & Mirrors >> Service Information >> Power Window System >> Rear Power Window RH Circuit Inspection (Main Power Window and Door Lock/Unlock Switch Operation)

Rear Power Window RH Circuit Inspection (Main Power Window and Door Lock/Unlock Switch Operation)

  1. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH OUTPUT SIGNAL
    1. Turn ignition switch OFF.
    2. Disconnect rear power window motor RH.
    3. Turn ignition switch ON.
    4. Check voltage between rear power window motor RH connector and ground.
      VOLTAGE SPECIFICATIONS

      Connector Terminals Condition Voltage (V) (Approx.)
      (+) (-)
      D304 2 Ground UP 0
      DOWN Battery voltage
      1 UP Battery voltage
      DOWN 0
      Fig 1: Checking Voltage Between Rear Power Window Motor RH Connector And Ground
      G04927875Courtesy of NISSAN MOTOR CO., U.S.A.

      OK or NG 

      OK: Replace rear power window motor RH. Refer to "REMOVAL AND INSTALLATION ".

      NG: GO TO 2.

  2. CHECK REAR POWER WINDOW MOTOR RH CIRCUIT
    1. Turn ignition switch OFF.
    2. Disconnect rear power window switch RH.
    3. Check continuity between rear power window switch RH connector (A) and rear power window motor RH connector (B).
      CONTINUITY SPECIFICATIONS

      Connector Terminal Connector Terminal Continuity
      A B
      D303 4 D304 2 Yes
      5 1 Yes
      Fig 2: Checking Continuity Between Rear Power Window Switch Rh Connector (A) And Rear Power Window Motor RH Connector
      G07142782Courtesy of NISSAN MOTOR CO., U.S.A.
    4. Check continuity between rear power window switch RH connector (A) and ground.
      CONTINUITY SPECIFICATIONS

      Connector Terminal Ground Continuity
      A
      D303 4 No
      5 No

      OK or NG 

      OK: GO TO 3.

      NG: Repair or replace harness.

  3. CHECK REAR POWER WINDOW SWITCH RH

    Check continuity between rear power window switch RH terminals.

    CONTINUITY SPECIFICATIONS

    Rear power window switch RH Terminals Continuity
    2 5 Yes
    3 4 Yes
    Fig 3: Checking Continuity Between Rear Power Window Switch RH Terminals
    G07142804Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: GO TO 4.

    NG: Replace rear power window switch RH. Refer to "REMOVAL AND INSTALLATION ".

  4. CHECK GROUND SUPPLY CIRCUIT
    1. Disconnect main power window and door lock/unlock switch.
    2. Check continuity between main power window and door lock/unlock switch connector (A) and rear power window switch RH connector (B).
      CONTINUITY SPECIFICATIONS

      A B Continuity
      Connector Terminal Connector Terminal
      D5 7 D303 2 Yes
      5 3 Yes
      Fig 4: Checking Continuity Between Main Power Window And Door Lock/Unlock Switch Connector (A) And Rear Power Window Switch RH Connector
      G07142805Courtesy of NISSAN MOTOR CO., U.S.A.
    3. Check continuity between main power window and door lock/unlock switch connector (A) and ground.
      CONTINUITY SPECIFICATIONS

      A Ground Continuity
      Connector Terminal
      D5 7 No
      5 No

      OK or NG 

      OK: GO TO 5.

      NG: Repair or replace harness.

  5. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH

    Check continuity between main power window and door lock/unlock switch terminals.

    CONTINUITY SPECIFICATIONS

    Main power window and door lock/unlock switch Terminals Condition Continuity
    17 7 Lock switch UNLOCK Yes
    Lock switch LOCK No
    5 Lock switch UNLOCK Yes
    Lock switch LOCK No
    Fig 5: Checking Continuity Between Main Power Window And Door Lock/Unlock Switch Terminals
    G05922872Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: Repair or replace harness.

    NG: Replace main power window and door lock/unlock switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About Mike's Workshop Manuals