Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2011 >> Rogue S, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component And System Testing - For CALIFORNIA >> Cooling Fan >> Component Inspection (Cooling Fan Motor)

Component Inspection (Cooling Fan Motor)

  1. CHECK COOLING FAN MOTORS
    1. Turn ignition switch OFF.
    2. Disconnect cooling fan motor-1 and -2 harness connectors E53, E54.
    3. Supply cooling fan motor terminals with battery voltage and check operation.
    COOLING FAN MOTOR TERMINALS OPERATION CHART

    Cooling fan motor terminals Operation
    (+) (-)
    1 3 and 4 Cooling fans operates at low speed.
    2 3 and 4
    1 and 2 3
    1 and 2 4
    1 and 2 3 and 4 Cooling fans operates at high speed.

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace cooling fan motor. Refer to " REMOVAL AND INSTALLATION ".

scientia non olet · About Mike's Workshop Manuals