Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2011 >> Rogue S, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System >> DTC/Circuit Diagnosis >> Door Switch >> Component Inspection

Component Inspection

  1. CHECK DOOR SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect door switch connector.
    3. Check door switch.
    CONTINUITY REFERENCE CHART

    Terminal Condition Continuity
    Each door 2 Ground Door switch pressed Exists
    Door switch released Does not exist
    Back door 3 4 Back door open Exists
    Back door close Does not exist

    Is the inspection result normal? 

    YES: Door switch is OK.

    NO: Replace Door switch. Refer to "REMOVAL AND INSTALLATION ".