Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2011 >> Murano SL, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (Body Control System (CROSSCABRIOLET)) >> Symptom Diagnosis >> Combination Switch System Symptoms >> Symptom Table

Symptom Table

WARNING: This page is about a different variant/trim than selected.
  1. Perform "Data Monitor" of CONSULT to check for any malfunctioning item.
  2. Check the malfunction combinations.
    Fig 1: Combination Switch System Symptoms Chart
    G07132806Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Identify the malfunctioning part from the agreed combination and repair or replace the part.
    MALFUNCTIONING PART REFERENCE CHART

    Malfunction combination Malfunctioning part Repair or replace
    A Combination switch INPUT 1 circuit Inspect the combination switch input circuit applicable to the malfunctioning part. Refer to "DIAGNOSIS PROCEDURE ".
    B Combination switch INPUT 2 circuit
    C Combination switch INPUT 3 circuit
    D Combination switch INPUT 4 circuit
    E Combination switch INPUT 5 circuit
    F Combination switch OUTPUT 1 circuit Inspect the combination switch output circuit applicable to the malfunctioning part. Refer to "DIAGNOSIS PROCEDURE ".
    G Combination switch OUTPUT 2 circuit
    H Combination switch OUTPUT 3 circuit
    I Combination switch OUTPUT 4 circuit
    J Combination switch OUTPUT 5 circuit
    K BCM Replace BCM. Refer to "REMOVAL AND INSTALLATION ".
    L Combination switch Replace the combination switch.
scientia non olet · About Mike's Workshop Manuals