Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2011 >> Maxima SV >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> System Description >> Diagnosis System (ECM) >> CONSULT-III Function >> Self-Diag Result Mode >> How to Erase DTC and 1st Trip DTC

How to Erase DTC and 1st Trip DTC

NOTE:
  • If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 10 seconds and then turn it ON (engine stopped) again.
  • If the DTC is not for A/T related items (see "DTC INDEX "), skip step  1.
  1. Erase DTC in TCM. Refer to "DTC INDEX ".
  2. Select "ENGINE" with CONSULT-III.
  3. Select "SELF-DIAG RESULTS".
  4. Touch "ERASE". (DTC in ECM will be erased.)
scientia non olet · About Mike's Workshop Manuals