CONSULT-III Function (ABS): Function
CONSULT-III can display each diagnostic item using the following diagnostic test modes.
DIAGNOSTIC TEST MODES REFERENCE CHART
| Diagnostic test mode | Function |
|---|---|
| ECU Identification | ABS actuator and electric unit (control unit) part number can be read. |
| Self Diagnostic Result | Displays ABS actuator and electric unit (control unit) self-diagnosis results. |
| Data Monitor | Displays ABS actuator and electric unit (control unit) input/output data in real time. |
| Active Test | Operation of electrical loads can be checked by sending drive signals to them. |
| Function Test | This mode is used to inform customers when the vehicle requires periodic maintenance. |
| Work support | Supports inspections and adjustments. Commands are transmitted to the ABS actuator and electric unit (control unit) for setting the status suitable for required operation, input/output signals are received from the ABS actuator and electric unit (control unit) and received data is displayed. |
| CAN Diag Support Monitor | The result of transmit/receive diagnosis of CAN communication can be read. |