Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2011 >> Juke SL, FWD, Automatic CVT >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> SRS Airbag Control System >> DTC/Circuit Diagnosis >> DTC B1209: Frontal Collision Detection >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. CHECK SELF-DIAG RESULT

    With CONSULT-III

    1. Turn ignition switch ON.
    2. Perform "Self Diagnostic Result" mode of "AIR BAG" using CONSULT-III.

    Without CONSULT-III

    1. Turn ignition switch ON.
    2. Check the air bag warning lamp status. Refer to "ON BOARD DIAGNOSIS FUNCTION ".
    NOTE: SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.

    Is malfunctioning part detected? 

    YES: Refer to "DIAGNOSIS PROCEDURE ".

    NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals