Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2011 >> Juke SL, 4WD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> With Intelligent Key System >> DTC/Circuit Diagnosis >> DTC B2110: Shift Position/Clutch Interlock Switch >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

NOTE: If DTC B2110 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
DTC DETECTION LOGIC CHART

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B2110 INTERLOCK/PNP SW OFF There is a difference between P/N position signal from transmission range switch and P/N position signal from BCM (CAN).
  • Harness or connectors (CAN communication line is open or shorted.)
  • Harness or connectors (Transmission range switch circuit is open or shorted.)
  • Transmission range switch
  • IPDM E/R
  • BCM