Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2011 >> Cube Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Symptom Diagnosis, Periodic Maintenance, Service Data And Specifications (SDS) (For CALIFORNIA) >> Fuel Injector >> Component Inspection

Component Inspection

  1. CHECK FUEL INJECTOR
    1. Turn ignition switch OFF.
    2. Disconnect fuel injector harness connector.
    3. Check resistance between fuel injector terminals as per the following.
      RESISTANCE REFERENCE CHART

      Terminals Resistance
      1 and 2 11.1 - 14.5 Ω [at 10 - 60°C (50 - 140°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace malfunctioning fuel injector. Refer to "EXPLODED VIEW ".

scientia non olet · About Mike's Workshop Manuals