Starter Motor
STARTER MOTOR SPECIFICATIONS
| Destination | For California | Except for California | ||
| Type | S114-944 | S114-955 | ||
| HITACHI make | ||||
| Reduction gear type | ||||
| System voltage | [V] | 12 | ||
| No-load | Terminal voltage | [V] | 11 | |
| Current | [A] | Less than 110 | ||
| Revolution | [rpm] | More than 3,750 | More than 3,000 | |
| Minimum diameter of commutator | [mm (in)] | 28.0 (1.102) | ||
| Minimum length of brush | [mm (in)] | 10.5 (0.413) | ||
| Brush spring tension | [N (kg, lb)] | 16.2 (1.65, 3.6) | ||
| Clearance between bearing metal and armature shaft | [mm (in)] | Less than 0.2 (0.008) | ||
| Clearance between pinion front edge and pinion stopper | [mm (in)] | 0.3 - 2.5 (0.012 - 0.098) | ||