Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2011 >> Cube Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> [Power Distribution System] >> DTC/Circuit Diagnosis >> B2616 Ignition Relay Circuit >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE
    1. Turn ignition switch ON under the following conditions, and wait for 1 second or more.
      • Selector lever is in the P position
      • Do not depress brake pedal
    2. Check "Self-diagnosis result" with CONSULT-III.

      Is DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals