Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2011 >> Cube Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> DTC/Circuit Diagnosis >> DTC C1144: Incomplete Steering Angle Sensor Adjustment >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. DTC REPRODUCTION PROCEDURE
    1. Turn the ignition switch ON.
    2. Select "ABS", "WORK SUPPORT" and "ST ANG SEN ADJUSTMENT" in order with CONSULT-III, and perform adjust the neutral position of steering angle sensor.
    3. Perform self-diagnosis for "ABS" with CONSULT-III.

      Is DTC "C1144" detected? 

      YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals