Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2011 >> 370Z Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 370Z - DTC P0643 Through P2A03 >> DTC P1211: TCS Control Unit >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    TESTING CONDITION: 

    Before performing the following procedure, confirm that battery voltage is more than 10.5 V at idle  .

    Go to 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE
    1. Start engine and let it idle for at least 60 seconds.
    2. Check 1st trip DTC.

    Is 1st trip DTC detected? 

    YES: "DIAGNOSIS PROCEDURE "

    NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals