Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2011 >> 370Z Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 370Z - DTC P0643 Through P2A03 >> DTC P0850: PNP Switch >> Component Function Check

Component Function Check

  1. PERFORM COMPONENT FUNCTION CHECK
    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connector terminals under the following conditions.
    TERMINALS VOLTAGE SPECIFICATION

    ECM Condition Voltage (V)
    Connector + -
    Terminal Terminal
    M107 109 128 Selector lever P or N (A/T) Neutral (M/T) Battery voltage
    Except above Approx. 0

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Go to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals