Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2010 >> Sentra SE-R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission (CVT) >> Service Information >> DTC P0710: Transmission Fluid Temperature Sensor A >> Component Inspection >> CVT Fluid Temperature Sensor

CVT Fluid Temperature Sensor

  1. Turn ignition switch OFF.
  2. Disconnect CVT unit harness connector.
  3. Check resistance between CVT unit harness connector terminals.
    CONNECTOR TERMINAL RESISTANCE CHART

    Name Connector Terminal Temperature °C (°F) Resistance (Approx.)
    CVT fluid temperature sensor F46 17 - 19 20 (68) 6.5 kΩ
    80 (176) 0.9 kΩ
  4. If NG, perform "SELF-DIAG RESULTS" mode for "TRANSMISSION".
    Fig 1: Checking Resistance Between CVT Unit Harness Connector Terminals
    G04916072Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals