Warning Lamp Function Malfunction
NOTE:
- Before performing the diagnosis in the following table, check "Trouble Diagnosis Procedure". Refer to "TROUBLE DIAGNOSIS PROCEDURE ".
- If the following "symptoms" are detected, check systems shown in the "Diagnosis/service procedure" column in this order.
SYMPTOM CHART
| Symptom | Diagnosis/service procedure | Reference |
|---|---|---|
| Intelligent Key low battery warning does not operate properly. | 1. Check "LOW BAT OF KEY FOB WARN" setting in "WORK SUPPORT". | BASIC OPERATION |
| 2. Intelligent Key battery inspection. | INTELLIGENT KEY BATTERY INSPECTION | |
| 3. KEY warning lamp (green) check. | "P-SHIFT" WARNING LAMP CHECK | |
| 4. Replace Intelligent Key unit. | REMOVAL AND INSTALLATION OF INTELLIGENT KEY UNIT | |
| P position warning lamp does not illuminate properly. | 1. CVT selector lever (park position switch) check. | CVT SELECTOR LEVER (PARK POSITION SWITCH) CHECK |
| 2. "P-SHIFT" warning lamp (red) check. | "P-SHIFT" WARNING LAMP CHECK | |
| 3. Replace Intelligent Key unit. | REMOVAL AND INSTALLATION OF INTELLIGENT KEY UNIT | |
| Take away warning lamp does not illuminate properly. (Take away warning chime is operated). | 1. KEY warning lamp (red) check. | "P-SHIFT" WARNING LAMP CHECK |
| 2. Replace Intelligent Key unit. | REMOVAL AND INSTALLATION OF INTELLIGENT KEY UNIT | |
| Ignition switch warning lamp does not illuminate properly. (Ignition switch warning chime is operated). | 1. KEY warning lamp (red) check. | "P-SHIFT" WARNING LAMP CHECK |
| 2. Replace Intelligent Key unit. | REMOVAL AND INSTALLATION OF INTELLIGENT KEY UNIT |