Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2010 >> Sentra SE-R >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio Visual, Navigation & Telephone System >> Service Information >> Telephone >> Bluetooth Control Unit Self-Diagnosis Function >> Self-Diagnosis Mode

Self-Diagnosis Mode

  1. Turn ignition switch to ACC or ON.
  2. Wait for the Bluetooth system to complete initialization. This may take up to 20 seconds.
  3. Press and hold the steering wheel audio control switch SEND button for at least 1.5 seconds. The Bluetooth system will begin to play a verbal prompt.
    Fig 1: Locating Steering Wheel Audio Control Switch SEND Button
    G04928683Courtesy of NISSAN MOTOR CO., U.S.A.
  4. While the prompt is playing, momentarily press the steering wheel audio control switch END button. The Bluetooth system will sound a 10 second beep.
  5. While the beep is sounding, momentarily press the steering wheel audio control switch END button again.
  6. The Bluetooth system has now entered into the diagnostic mode. Results of the diagnostic checks will be verbalized to the technician. Refer to "MALFUNCTION CODE/SYMPTOM CHART ".
  7. If there are no failure records to report, the speed pulse count will be reported next.
    Fig 2: Locating Steering Wheel Audio Control Switch END Button
    G06553990Courtesy of NISSAN MOTOR CO., U.S.A.
  8. After the speed pulse count is reported, an interactive Bluetooth microphone test will be performed. Follow the voice prompt. If the Bluetooth microphone test fails refer to "MALFUNCTION CODE/SYMPTOM CHART ".
  9. Self-diagnosis mode is complete. A short beep is heard.
scientia non olet · About Mike's Workshop Manuals