Steering Switch Check (With Bluetooth)

CHECK HARNESS

Turn ignition switch OFF.
Disconnect Bluetooth control unit connector B15 and spiral cable connector M30.

Check continuity between Bluetooth control unit connector B15 (A) terminals 12, 13, and 14 and spiral cable connector M30 (B) terminals 25, 31, and 33.

TERMINALS CONTINUITY REFERENCE CHART

Terminals				Continuity
A		B
Connector	Terminal	Connector	Terminal
B15	12	M30	33	Yes
	13		31
	14		25

Fig 1: Checking Continuity Between Bluetooth Control Unit Connector B15 (A) Terminals 12, 13, And 14 And Spiral Cable Connector M30 (B) Terminals 25, 31, And 33

Courtesy of NISSAN MOTOR CO., U.S.A.

Check continuity between Bluetooth control unit and ground.

TERMINALS CONTINUITY REFERENCE CHART

Terminals			Continuity
(+)		(-)
Connector	Terminal	(-)
B15	12	Ground	No
	13
	14

OK or NG

OK: GO TO 2.

NG: Repair harness.

CHECK HARNESS

Disconnect audio unit connector M43 (mid system) or AV control unit M92 (premium system).

Check continuity between audio unit connector M43 (mid system) or AV control unit M92 (premium system) (A) terminals 6, 15, and 16 and Bluetooth control unit connector B15 (B) terminals 17, 19, and 18.

TERMINALS CONTINUITY REFERENCE CHART

Terminals				Continuity
(A)		(B)
Connector	Terminal	Connector	Terminal
M43 (mid system) M92 (premium system)	6	B15	17	Yes
	15		19
	16		18

Fig 2: Checking Continuity Between AV Control Unit M92 (Premium System) Terminals 6, 15, And 16 And Bluetooth Control Unit Connector B15 Terminals 17, 19, And 18

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK: GO TO 3.

NG: Repair harness.

SPIRAL CABLE CHECK
1. Disconnect spiral cable connector M78.
2. Check continuity between spiral cable terminals.
  15 - 33 : Continuity should exist.
  
  17 - 31 : Continuity should exist.
  
  19 - 25 : Continuity should exist.
  
  Fig 3: Checking Continuity Between Spiral Cable Terminals
  Courtesy of NISSAN MOTOR CO., U.S.A.
  
  OK or NG
  
  OK: GO TO 4.
  
  NG: Replace spiral cable. Refer to "REMOVAL AND INSTALLATION ".

CHECK STEERING SWITCH RESISTANCE

Check resistance between spiral cable connector M78 terminals.

TERMINALS RESISTANCE REFERENCE CHART

Terminal		Signal name	Condition	Resistance (Ω) (Approx.)
17	19	Seek (down)	Depress Seek down switch.	165
		Phone/Send	Depress Phone/Send switch.	0
		Volume (down)	Depress volume down switch.	487
15	19	Seek (up)	Depress Seek up switch.	165
		Phone/End	Depress Phone/End switch.	0
		Volume (up)	Depress volume up switch.	487

Fig 4: Checking Resistance Between Spiral Cable Connector M78 Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK: Inspection End.

NG: Replace steering switch. Refer to "REMOVAL AND INSTALLATION ".