FOR MEXICO : Precautions for Harness Repair

COMMUNICATION LINE 

• Solder the repaired area and wrap tape around the soldered area.

Fig 1: Identifying Soldered And Taped Area

Courtesy of NISSAN MOTOR CO., U.S.A.

• Bypass connection is never allowed at the repaired area.
  NOTE: Bypass connection may cause communication error as spliced wires that are separate from the main line or twisted lines lose noise immunity.
• Replace the applicable harness as an assembly if error is detected on the shield lines of communication line.

Fig 2: Identifying Bypass Connection

Courtesy of NISSAN MOTOR CO., U.S.A.