Component Inspection
- CHECK BRAKE FLUID LEVEL SWITCH
- Turn ignition switch OFF.
- Disconnect brake fluid level switch connector.
- Check continuity between brake fluid level switch connector terminals.
CONNECTOR TERMINAL CONTINUITY CHART
| Brake fluid level switch | Condition | Continuity | |
|---|---|---|---|
| Connector | Terminal | ||
| E37 | 1 - 2 | When brake fluid is full in the reservoir tank. | Not existed |
| When brake fluid is empty in the reservoir tank. | Existed | ||
Is the inspection result normal?
YES: INSPECTION END
NO: Replace reservoir tank.