| AV CONTROL UNIT |
- Integrates hard disk drive (HDD) allowing map data and music data to be stored.
- It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit.
- The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions.
- It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function.
- It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function.
- It inputs the illumination signals that are required for the display dimming control.
- It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake).
- Update of map data is performed with the CONSULT-III and the applicable cable.
- It includes the TEL adapter and Bluetooth™ function.
|
| FRONT DISPLAY UNIT |
- Front display image is controlled by the serial communication from AV control unit.
- RGB image signal is input from AV control unit (RGB, RGB area and RGB synchronizing). Auxiliary image signal is input from the auxiliary input jack. Camera image signal is input from camera control unit.
- Synchronize signal (HP, VP) is output to AV control unit.
- Touch panel function can be operated for each system by touching a display directly.
|
| BOSE AMP. |
- Inputs power (amp. ON) and sound signal from AV control unit, and outputs sound signal to woofer and each speaker.
- Woofer amp. ON signal is transmitted to woofer.
|
| WOOFER |
- Composed of two woofers and a woofer amp.
- Inputs power (amp. ON) and sound signal from BOSE amp.
- Outputs low frequency sound.
|
| FRONT DOOR SPEAKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (mid and low range).
|
| REAR DOOR SPEAKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (mid and low range).
|
| FRONT SQUAWKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (high and mid range).
|
| REAR SPEAKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (high and mid range).
|
| CENTER SPEAKER |
- Outputs sound signal from BOSE amp.
- Outputs sound (high and mid range).
|
| MULTIFUNCTION SWITCH |
- Operation panel is equipped with the centralized switch where audio and auxiliary input operations are integrated.
- The multifunction switch is connected to the preset switch by wiring harness, and it transmits the operation signal to the preset switch.
|
| PRESET SWITCH |
- Operation panel is equipped with the centralized switch where audio and air conditioner operations are integrated.
- The preset switch is connected via AV communication, and it transmits the operation signals of the preset switch and multifunction switch.
- The disk ejection operating signal is performed by wiring harness.
|
| STEERING SWITCH |
- Operations for audio, hands-free phone, audio response and navigation, etc. are possible.
- Steering switch signal (operation signal) is output to AV control unit.
|
| CAMERA CONTROL UNIT |
- Camera image signal is input from rear view camera. Camera image signal output to front display unit.
- Power (camera ON signal) is transmitted to rear view camera.
- Controlled by AV communication transmitted from AV control unit.
- AV control unit recognizes the presence of camera system with camera connection recognition signal.
|
| REAR VIEW CAMERA |
- The image of vehicle rear view is transmitted to camera control unit.
- It receives the power (camera ON signal) from the camera control unit and operates.
|
| STEERING ANGLE SENSOR |
Steering signal necessary for possible route line control is transmitted to camera control unit. |
| MICROPHONE |
- Used for hands-free phone operation and voice recognition.
- Mic signal is transmitted to AV control unit.
- The power (Mic. power supply) is supplied from the AV control unit.
|
| AUXILIARY INPUT JACKS |
AUX image signal of auxiliary input is transmitted to front display, and sound signal is transmitted to AV control unit. |
| GPS ANTENNA |
GPS signal is received and transmitted to AV control unit. |
| ANTENNA BASE |
A radio antenna base integrated with radio antenna amp. and satellite radio antenna is adopted.
ANTENNA AMP.
- Radio signal received by rod antenna is amplified and transmitted to AV control unit.
- Power (antenna amp. ON signal) is supplied from AV control unit. SATELLITE RADIO ANTENNA
- Receives the satellite radio wave and outputs it to the AV control unit.
|
| iPod ADAPTER |
- Inputs iPod sound signal from iPod®, and outputs iPod sound signal to AV control unit.
- Receiving/transmitting of iPod® operation signals are performed as follows:
- between AV control unit and iPod adapter: AV communication.
- between iPod® and iPod adapter: serial communication.
|