Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2010 >> Murano SL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Security Control System) >> With Intelligent Key System >> Component Diagnosis >> B261A Push-Button Ignition Switch >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2009 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 1
    1. Press push-button ignition switch for 1 second under the following condition.
      • Selector lever is in the P or N position.
      • Do not depress brake pedal.
    2. Check "Self diagnostic result" with CONSULT-III.

    Is DTC detected? 

    YES: Go to "DIAGNOSIS PROCEDURE "

    NO: GO TO  2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 2
    1. Insert Intelligent Key into the key slot.
    2. Press the push-button ignition switch under the following conditions and wait for at least 1 second.
      • Selector lever is in the P or N position.
      • Do not depress brake pedal.
    3. Check "Self diagnostic result" with CONSULT-III.

    Is DTC detected? 

    YES: Go to "DIAGNOSIS PROCEDURE ".

    NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals