Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2010 >> Murano SL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Security Control System) >> With Intelligent Key System >> Component Diagnosis >> B2560 Starter Control Relay >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2009 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC B2560 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "BCM : DTC LOGIC "
  • If DTC B2560 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "BCM : DTC LOGIC ".
DTC DETECTING CONDITION AND POSSIBLE CAUSE

DTC Self-diagnosis name DTC detecting condition Possible causes
B2560 STARTER CONTROL RELAY BCM detects a mismatch between the OFF request of starter control relay to IPDM E/R and the feedback. (The feedback is ON instead of OFF.) IPDM E/R
scientia non olet · About Mike's Workshop Manuals